HEIDEN power GmbH

Contact us

 

+49-8196-9988-0

info@heidenpower.com


Office hours:
Monday – Thursday: 08.00 – 17.00 Uhr
Friday: 08.00 – 14.30 Uhr

Address:
HEIDEN power GmbH
Am Wiesengrund 1
86932 Pürgen / Germany


AC Quelle Serie AFV-P

AFV-P

AC SOURCE

AFV-P

High Performance Programmable AC Power Source

AC Quelle Serie AFV-P

AC and DC

The AC sources of this series have a single-phase output. It is also possible to output a DC voltage. We offer three-phase AC sources with the AFV Plus series.

Programmable and high signal quality

This compact power source provides clean power with THD less than 0.3% at 50/60 Hz and it delivers output voltage of 0-310 V and frequency of 40-500 Hz (opt. 15-1000 Hz). It is ideal for commercial, testing and inspection institutes but also household goods and aerospace.

Measurement acquisition and possibilities

Besides sinusoidal signals, many other signal variants are possible. With the integrated flicker simulation, short-term power failures can be simulated.

Measurement acquisition

AFV-P series comprises measurement features of rms voltage, rms current, true power, apparent power, power factor, crest factor, reactive power and etc. Its 5” touch screen with rotary knob allows quick adjustments and configurations of voltage, current and frequency. Total 1200 test steps in 50 built-in memories and transient generation functions allow simulations of voltage variations, surges, drops and frequency disturbances. Users can set up starting and ending phase angle from 0 – 359 degrees and they can also remotely control AFV-P via standard interfaces. Free control software and LabVIEW driver are available for easy programming and remote control.

  • Compact design and high power density: 600 VA to 2500 VA in only 2RU and 5000 VA in 4RU
  • AC source with DC output: Extends applications to DC testing
  • Wide range of output voltage from 0 – 310 V
  • Output frequency optional from 15 – 1000 Hz
  • Distortion factor is none 0.3 % at frequencies below 100 Hz
  • Ideal for high inrush currents: peak current up to 4.5 times Inenn
  • Start and end phase angle can be defined from 0° to 359
  • Current foldback function: output current is kept constant when output voltage fluctuates under load
  • Constant voltage and constant current operation
  • STEP and RAMP function: ideal for voltage and frequency ramps, for example to effectively reduce the inrush current during motor start-up
  • Transient specification for simulating power line disturbances (PLD)
  • Free control software and LabVIEW drivers: allow the user to easily program and connect to higher-level automation systems
  • High slew rate: less than 300 µs from 0 – 90% output voltage

AFV-P series

DescriptionPowerVoltageCurrentDimensions
AFV-P-600600 VA / 500 W155 / 310 V5 / 2,5 A88 x 442 x 495 mm
AFV-P-12501.250 VA / 1.000 W155 / 310 V10 / 5 A88 x 442 x 495 mm
AFV-P-25002.500 VA / 2.000 W155 / 310 V20 / 10 A88 x 442 x 650 mm
AFV-P-50005.000 VA / 4.000 W155 / 310 V40 / 20 A176 x 442 x 665 mm

AC SOURCE

AFV-P

High Performance Programmable AC Power Source

AC Quelle Serie AFV-P

AC and DC

The AC sources of this series have a single-phase output. It is also possible to output a DC voltage. We offer three-phase AC sources with the AFV Plus series.

Programmable and high signal quality

This compact power source provides clean power with THD less than 0.3% at 50/60 Hz and it delivers output voltage of 0-310 V and frequency of 40-500 Hz (opt. 15-1000 Hz). It is ideal for commercial, testing and inspection institutes but also household goods and aerospace.

Measurement acquisition and possibilities

Besides sinusoidal signals, many other signal variants are possible. With the integrated flicker simulation, short-term power failures can be simulated.

Measurement acquisition

AFV-P series comprises measurement features of rms voltage, rms current, true power, apparent power, power factor, crest factor, reactive power and etc. Its 5” touch screen with rotary knob allows quick adjustments and configurations of voltage, current and frequency. Total 1200 test steps in 50 built-in memories and transient generation functions allow simulations of voltage variations, surges, drops and frequency disturbances. Users can set up starting and ending phase angle from 0 – 359 degrees and they can also remotely control AFV-P via standard interfaces. Free control software and LabVIEW driver are available for easy programming and remote control.

  • Compact design and high power density: 600 VA to 2500 VA in only 2RU and 5000 VA in 4RU
  • AC source with DC output: Extends applications to DC testing
  • Wide range of output voltage from 0 – 310 V
  • Output frequency optional from 15 – 1000 Hz
  • Distortion factor is none 0.3 % at frequencies below 100 Hz
  • Ideal for high inrush currents: peak current up to 4.5 times Inenn
  • Start and end phase angle can be defined from 0° to 359
  • Current foldback function: output current is kept constant when output voltage fluctuates under load
  • Constant voltage and constant current operation
  • STEP and RAMP function: ideal for voltage and frequency ramps, for example to effectively reduce the inrush current during motor start-up
  • Transient specification for simulating power line disturbances (PLD)
  • Free control software and LabVIEW drivers: allow the user to easily program and connect to higher-level automation systems
  • High slew rate: less than 300 µs from 0 – 90% output voltage

AFV-P series

DescriptionPowerVoltageCurrentDimensions
AFV-P-600600 VA / 500 W155 / 310 V5 / 2,5 A88 x 442 x 495 mm
AFV-P-12501.250 VA / 1.000 W155 / 310 V10 / 5 A88 x 442 x 495 mm
AFV-P-25002.500 VA / 2.000 W155 / 310 V20 / 10 A88 x 442 x 650 mm
AFV-P-50005.000 VA / 4.000 W155 / 310 V40 / 20 A176 x 442 x 665 mm