HEIDEN power GmbH

Contact us

 

+49-8196-9988-0

info@heidenpower.com


Office hours:
Monday – Thursday: 08.00 – 17.00 Uhr
Friday: 08.00 – 14.30 Uhr

Address:
HEIDEN power GmbH
Am Wiesengrund 1
86932 Pürgen / Germany


Regenerative ERI DC-Last

ERI DC-Load

DC SINK

ERI DC-Load

The regenerative

Regenerative ERI DC-Last

Energy recovery

The electronic loads of the ERI series put in the absorbed power of up to 10.8 kW per load back into the local supply grid with an efficiency of up to 90%. The strength of the devices lies in the very extensive range of interfaces. In addition to Ethernet, USB, RS-232 and an I/O port, a CAN interface is also built in serially. The programming is done in SCPI syntax with a high command volume.

Mechanics

The ERI series is designed in stable 19“ technology. It can be used as a desktop unit or built in a 19“ rack without additional options. All connections are located at the backside. The current connections are designed as solid copper bars.

Operating mode

The devices of the regenerative ERI series have the operating modes constant current, constant voltage, constant resistance and constant power. In addition, limit values for voltage and current can be set in each operating mode. Dynamic processes can be simulated with up to 300 setting values. An automatic DAQ function allows measurement data to be stored directly on an external USB stick.

Measurement data acquisition

The data acquisition tool installed serially at the ERI extends the functionality of the devices to a complete test station.

  • Energy feedback into the local current grid
  • Low heat generation, low noise, laboratory operation
  • CC, CV, CR, CP, CCV, CVC mode
  • Ethernet + USB + RS-232 + CAN serially
  • SCPI programming with measuring function
  • Dynamic loads with synchronized DAQ
  • Measurement data storage directly on USB stick
  • Adjustable limit values for current and voltage

DescriptionPowerVoltageCurrentDimensionsWeight
ERI036123.600 W120 V110 A19“ x 3 U x 654 mm21 kg
ERI072127.200 W120 V220 A19“ x 3 U x 654 mm29 kg
ERI1081210.800 W120 V330 A19“ x 3 U x 654 mm38 kg
ERI036403.600 W400 V45 A19“ x 3 U x 654 mm21 kg
ERI072407.200 W400 V90 A19“ x 3 U x 654 mm29 kg
ERI1084010.800 W400 V135 A19“ x 3 U x 654 mm38 kg
DC SINK

ERI DC-Load

The regenerative

Regenerative ERI DC-Last

Energy recovery

The electronic loads of the ERI series put in the absorbed power of up to 10.8 kW per load back into the local supply grid with an efficiency of up to 90%. The strength of the devices lies in the very extensive range of interfaces. In addition to Ethernet, USB, RS-232 and an I/O port, a CAN interface is also built in serially. The programming is done in SCPI syntax with a high command volume.

Mechanics

The ERI series is designed in stable 19“ technology. It can be used as a desktop unit or built in a 19“ rack without additional options. All connections are located at the backside. The current connections are designed as solid copper bars.

Operating mode

The devices of the regenerative ERI series have the operating modes constant current, constant voltage, constant resistance and constant power. In addition, limit values for voltage and current can be set in each operating mode. Dynamic processes can be simulated with up to 300 setting values. An automatic DAQ function allows measurement data to be stored directly on an external USB stick.

Measurement data acquisition

The data acquisition tool installed serially at the ERI extends the functionality of the devices to a complete test station.

  • Energy feedback into the local current grid
  • Low heat generation, low noise, laboratory operation
  • CC, CV, CR, CP, CCV, CVC mode
  • Ethernet + USB + RS-232 + CAN serially
  • SCPI programming with measuring function
  • Dynamic loads with synchronized DAQ
  • Measurement data storage directly on USB stick
  • Adjustable limit values for current and voltage

DescriptionPowerVoltageCurrentDimensionsWeight
ERI036123.600 W120 V110 A19“ x 3 U x 654 mm21 kg
ERI072127.200 W120 V220 A19“ x 3 U x 654 mm29 kg
ERI1081210.800 W120 V330 A19“ x 3 U x 654 mm38 kg
ERI036403.600 W400 V45 A19“ x 3 U x 654 mm21 kg
ERI072407.200 W400 V90 A19“ x 3 U x 654 mm29 kg
ERI1084010.800 W400 V135 A19“ x 3 U x 654 mm38 kg