HACR50 AC Supply
HACR50 AC Supply
Bidirectional
High power density
The new, bidirectional AC source is equipped with a proven digital power stage to provide or take power at the output interface. With only 6 U and a total weight of approx. 60 kg, the AC source/ sink can be used as a mobile device installed in a flight case. The HACR50 is characterized by its high overload capacity of 100% (100 kVA) for 30 seconds. The connection via Ethernet enables a modern integration of the AC source/sink into the existing infrastructure.
Easy to use
The graphical representation of the measured and input values are displayed via a high-resolution touch panel.
- Simulation of three-phases grids 3Ph/N/PE
- 50.000 VA permanent
- 100.000 VA 30 seconds (overloading capability)
- 19“ built-in unit with only 6 height units
- Weight: < 60 kg
- Voltage regulation: < 1% F.S.
- THDu < 1% @f OUT < 500 Hz
- Efficiency: 94 %.
- Output voltage: 0…460 VAC phase-phase
- Adjustable variable frequency from 1 to 1,000 Hz
- 80 A per phase permanent
- 160 A per phase for up to 30 seconds
- Display/operation via 7“ touch panel
- Measurement of: voltage, current, active power and power factor
- Optionally installed in a flight case for mobile applications
- Constant voltage operation
- Current-limitation
- Digital interface: LAN
- Programming through digital interface
- Air cooling
- Special versions on request
HACR50 AC Supply
Bidirectional
High power density
The new, bidirectional AC source is equipped with a proven digital power stage to provide or take power at the output interface. With only 6 U and a total weight of approx. 60 kg, the AC source/ sink can be used as a mobile device installed in a flight case. The HACR50 is characterized by its high overload capacity of 100% (100 kVA) for 30 seconds. The connection via Ethernet enables a modern integration of the AC source/sink into the existing infrastructure.
Easy to use
The graphical representation of the measured and input values are displayed via a high-resolution touch panel.
- Simulation of three-phases grids 3Ph/N/PE
- 50.000 VA permanent
- 100.000 VA 30 seconds (overloading capability)
- 19“ built-in unit with only 6 height units
- Weight: < 60 kg
- Voltage regulation: < 1% F.S.
- THDu < 1% @f OUT < 500 Hz
- Efficiency: 94 %.
- Output voltage: 0…460 VAC phase-phase
- Adjustable variable frequency from 1 to 1,000 Hz
- 80 A per phase permanent
- 160 A per phase for up to 30 seconds
- Display/operation via 7“ touch panel
- Measurement of: voltage, current, active power and power factor
- Optionally installed in a flight case for mobile applications
- Constant voltage operation
- Current-limitation
- Digital interface: LAN
- Programming through digital interface
- Air cooling
- Special versions on request