TC.ACS Software / Tools
TC.ACS Software / Tools
Application software: ACS Control and GridSim
The customized software ACS Control allows manual control and specification of voltage and frequency. Extended by the optional GridSim, it enables the programming and running of automated test sequences including data acquisition of the system. For this purpose, the software contains its own screens for parameterization, for test sequences, for visualization of the current plant data and measured values as well as for recording and documenting measured values.
- Grid simulation with normal sine wave
- Amplitude modulation (AM) Acts: EN 61000-4-11
- Frequency modulation (FM) Acts: UL 1741
- Additive curves acts: EN 61000-4-13
- Harmonic via fourier tool acts: EN 61000-4-13 (Test of AC onboard chargers)
Application Software: RLC-Load Mode
With this option TC.ACS simulates the RLC resonant circuits with previously calculated values. Corrections of the values during operation are easily possible, so that the grid can be adjusted step by step according to your requirements. This completely eliminates the time-consuming manipulation and rewiring of the R-L-C components.
- R, L and C portions programmable
- Regeneration of the absorbed energy
- Loading of AC sources
- Island grid detection according to DIN V VDE V 0126-1-1 or VDE-AR-N 4105
Application Software: Amplifier Mode
In amplifier mode, you use the TC.ACS as a full 4-quadrant amplifier with up to 1 kHz fundamental frequency and 5 kHz modulation frequency. In HIL systems you can map your simulated scenarios.
- Voltage amplifier
- Current amplifier
- Programmable limits
- Programmable gain factor
TC.ACS Software / Tools
Application software: ACS Control and GridSim
The customized software ACS Control allows manual control and specification of voltage and frequency. Extended by the optional GridSim, it enables the programming and running of automated test sequences including data acquisition of the system. For this purpose, the software contains its own screens for parameterization, for test sequences, for visualization of the current plant data and measured values as well as for recording and documenting measured values.
- Grid simulation with normal sine wave
- Amplitude modulation (AM) Acts: EN 61000-4-11
- Frequency modulation (FM) Acts: UL 1741
- Additive curves acts: EN 61000-4-13
- Harmonic via fourier tool acts: EN 61000-4-13 (Test of AC onboard chargers)
Application Software: RLC-Load Mode
With this option TC.ACS simulates the RLC resonant circuits with previously calculated values. Corrections of the values during operation are easily possible, so that the grid can be adjusted step by step according to your requirements. This completely eliminates the time-consuming manipulation and rewiring of the R-L-C components.
- R, L and C portions programmable
- Regeneration of the absorbed energy
- Loading of AC sources
- Island grid detection according to DIN V VDE V 0126-1-1 or VDE-AR-N 4105
Application Software: Amplifier Mode
In amplifier mode, you use the TC.ACS as a full 4-quadrant amplifier with up to 1 kHz fundamental frequency and 5 kHz modulation frequency. In HIL systems you can map your simulated scenarios.
- Voltage amplifier
- Current amplifier
- Programmable limits
- Programmable gain factor