1138-2 W high current supply
1138-2 W high current supply
Water-cooled for electroplating and power to X
Galvanic source
The HEIDEN 1138-2 W series is a watercooled high-current supply in switched-mode power supply technology designed for direct installation on the application with minimum space requirements.
The 1138-2 W is a high-quality electronic rectifier, designed for industrial use, not only in the electroplating industry.
Water cooling
Due to the high DC currents, the racks are equipped with water cooling ex works. This reduces noise emissions and waste heat to the immediate surroundings to a minimum. This allows the racks to be installed directly in the test field. The high protection class IP54 protects the electronics from dirt ingress and ensures reliable operation even under the toughest conditions.
Various fields of application
In addition to the classic Gavanik applications, the source has proven itself in Industire at power 2 X applications, is suitable for high current contact tests or is used for testing and heating electrically conductive ropes.
Galvanic isolation
The galvanic separation of the power stage from the control system is guaranteed by the digital control card.
Switch mode power supply technology
This DC current source is designed in switch mode power supply technology. The advantages of this technology: Very compact design maximum precision in control behavior low ripple, high efficiency > 90 %.
Optional Active Front End (AFE)
With the optional, active power factor correction AFE, the 1138-2W achieves a cosine phi of almost 1.
- Highest currents up to 10.000 A per rack
- Up to 1.000 V
- Ripple < 1 %
- Efficiency > 90
- Power factor cos Phi 0,95
- Constant current control
- Constant voltage control
| Description | Power | Voltage | Current | Dimensions | Cooling |
|---|---|---|---|---|---|
| 1138-2W-20-10000 | 200 kW | 20 V | 10.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-25-8000 | 200 kW | 25 V | 8.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-40-5000 | 200 kW | 40 V | 5.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-50-4000 | 200 kW | 50 V | 4.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-60-3000 | 180 kW | 60 V | 3.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-80-2500 | 200 kW | 80 V | 2.500 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-100-2000 | 200 kW | 100 V | 2.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-120-1600 | 192 kW | 120 V | 1.600 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-150-2000 | 180 kW | 150 V | 1.200 A | 800 x 600 x 2.200 mm | Water Cooling |
1138-2 W high current supply
Water-cooled for electroplating and power to X
Galvanic source
The HEIDEN 1138-2 W series is a watercooled high-current supply in switched-mode power supply technology designed for direct installation on the application with minimum space requirements.
The 1138-2 W is a high-quality electronic rectifier, designed for industrial use, not only in the electroplating industry.
Water cooling
Due to the high DC currents, the racks are equipped with water cooling ex works. This reduces noise emissions and waste heat to the immediate surroundings to a minimum. This allows the racks to be installed directly in the test field. The high protection class IP54 protects the electronics from dirt ingress and ensures reliable operation even under the toughest conditions.
Various fields of application
In addition to the classic Gavanik applications, the source has proven itself in Industire at power 2 X applications, is suitable for high current contact tests or is used for testing and heating electrically conductive ropes.
Galvanic isolation
The galvanic separation of the power stage from the control system is guaranteed by the digital control card.
Switch mode power supply technology
This DC current source is designed in switch mode power supply technology. The advantages of this technology: Very compact design maximum precision in control behavior low ripple, high efficiency > 90 %.
Optional Active Front End (AFE)
With the optional, active power factor correction AFE, the 1138-2W achieves a cosine phi of almost 1.
- Highest currents up to 10.000 A per rack
- Up to 1.000 V
- Ripple < 1 %
- Efficiency > 90
- Power factor cos Phi 0,95
- Constant current control
- Constant voltage control
| Description | Power | Voltage | Current | Dimensions | Cooling |
|---|---|---|---|---|---|
| 1138-2W-20-10000 | 200 kW | 20 V | 10.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-25-8000 | 200 kW | 25 V | 8.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-40-5000 | 200 kW | 40 V | 5.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-50-4000 | 200 kW | 50 V | 4.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-60-3000 | 180 kW | 60 V | 3.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-80-2500 | 200 kW | 80 V | 2.500 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-100-2000 | 200 kW | 100 V | 2.000 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-120-1600 | 192 kW | 120 V | 1.600 A | 800 x 600 x 2.200 mm | Water Cooling |
| 1138-2W-150-2000 | 180 kW | 150 V | 1.200 A | 800 x 600 x 2.200 mm | Water Cooling |