HEIDEN power GmbH

Contact us

 

+49-8196-9988-0

info@heidenpower.com


Office hours:
Monday – Thursday: 08.00 – 17.00 Uhr
Friday: 08.00 – 14.30 Uhr

Address:
HEIDEN power GmbH
Am Wiesengrund 1
86932 Pürgen / Germany


Power to X

1138 High current supply

DC SOURCE

1138 High current supply

Industrial current supply / electroplating and power to X

Hochstromversorgung power to gas

Galvanic source

The HEIDEN 1138 DC high current power supply is a high quality electronic rectifier, designed for industrial use, not only in the electroplating industry. The optionally watercooled DC current source with switchmode power supply technology is designed for direct installation at the electroplating bath with minimum space requirements.

Electronic control

The electronic control guarantees that the set values are maintained during operation, even if the load on the DC output changes. The power range can be individually multiplied by series or parallel connection.

Various fields of application

In addition to the classic Gavanik applications, the source has proven itself in industrie at power 2 X applications, is suitable for high current contact tests or is used for testing and heating electrically conductive ropes.

Galvanic isolation

The galvanic separation of the power stage from the control system is guaranteed by the digital control card.

Switch mode power supply technology

This DC current source is designed in switch mode power supply technology. The advantages of this technology: very compact design maximum precision in control behavior low ripple, high efficiency (> 85 %)

  • High currents up to 5,000 A per rack
  • Ripple < 2
  • Efficiency > 85%.
  • Power factor cos Phi 0,95
  • Constant current control
  • Constant voltage control
  • Higher currents through parallel connection

DescriptionPowerVoltageCurrentDimensionsCooling
1138-6-500030 kW6 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-8-500040 kW8 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-10-500050 kW10 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-12-500060 kW12 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-15-500075 kW15 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-18-400072 kW18 V4.000 A600 x 600 x 2.200 mmAir Cooling
1138-20-350070 kW20 V3.500 A600 x 600 x 2.200 mmAir Cooling
1138-24-300072 kW24 V3.000 A600 x 600 x 2.200 mm Air Cooling
1138-30-350075 kW30 V2.500 A600 x 600 x 2.200 mmAir Cooling
1138-1000-8080 kW1.000 V80 A600 x 600 x 2.200 mmAir Cooling
DC SOURCE

1138 High current supply

Industrial current supply / electroplating and power to X

Hochstromversorgung power to gas

Galvanic source

The HEIDEN 1138 DC high current power supply is a high quality electronic rectifier, designed for industrial use, not only in the electroplating industry. The optionally watercooled DC current source with switchmode power supply technology is designed for direct installation at the electroplating bath with minimum space requirements.

Electronic control

The electronic control guarantees that the set values are maintained during operation, even if the load on the DC output changes. The power range can be individually multiplied by series or parallel connection.

Various fields of application

In addition to the classic Gavanik applications, the source has proven itself in industrie at power 2 X applications, is suitable for high current contact tests or is used for testing and heating electrically conductive ropes.

Galvanic isolation

The galvanic separation of the power stage from the control system is guaranteed by the digital control card.

Switch mode power supply technology

This DC current source is designed in switch mode power supply technology. The advantages of this technology: very compact design maximum precision in control behavior low ripple, high efficiency (> 85 %)

  • High currents up to 5,000 A per rack
  • Ripple < 2
  • Efficiency > 85%.
  • Power factor cos Phi 0,95
  • Constant current control
  • Constant voltage control
  • Higher currents through parallel connection

DescriptionPowerVoltageCurrentDimensionsCooling
1138-6-500030 kW6 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-8-500040 kW8 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-10-500050 kW10 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-12-500060 kW12 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-15-500075 kW15 V5.000 A600 x 600 x 2.200 mmAir Cooling
1138-18-400072 kW18 V4.000 A600 x 600 x 2.200 mmAir Cooling
1138-20-350070 kW20 V3.500 A600 x 600 x 2.200 mmAir Cooling
1138-24-300072 kW24 V3.000 A600 x 600 x 2.200 mm Air Cooling
1138-30-350075 kW30 V2.500 A600 x 600 x 2.200 mmAir Cooling
1138-1000-8080 kW1.000 V80 A600 x 600 x 2.200 mmAir Cooling