AC-Load ACL
AC-Load ACL
ACLS single-phase and ACLT three-phases
Description
DC voltage and AC voltage up to 1,000 Hz loads the ACL series.Besides the single-phase models (ACLS) there are also threephases loads (ACLT) which combine 3 channels or phases in one enclosure. Ethernet, USB, RS-232, CAN, I/O interface and a system bus for master-slave connection are built in serially, the GPIB interface is available as an option. The programming is done in SCPI with an extensive command syntax.
Operating modes
The ACL series loads have the operating modes constant current, constant resistance, constant power and constant voltage (CC, CR, CP, CV mode). In ACL mode, the load current mode has the set wave form independent of the input voltage. In resistance mode the height and wave form of the current depends on the input voltage. In power and voltage mode, the power or voltage is controlled by adjusting the input current.
Single-phase and rotary currents
In addition to the ACLS single-phase loading systems, the ACLT series models were developed for loading rotary current systems. They combine three alternating current load channels in one enclosure. The three load channels can be used to load 3 different DUTs in AC or DC operation or to test a rotary current system.
Parallel connection
To increase the maximum load current several channels of a rotary current device ACLT, but also several single-phase devices ACLS can be connected in parallel. Several singlephase devices can be connected to a master-slave system.
One phase load input
| Description | Power | Voltage | Current | Dimensions |
|---|---|---|---|---|
| ACLS00528 | 500 W | 280 V | 4 A | 2 U |
| ACLS00550 | 500 W | 500 V | 2 A | 2 U |
| ACLS01028 | 1 KW | 280 V | 8 A | 2 U |
| ACLS01050 | 1 KW | 500 V | 4 A | 2 U |
| ACLS01428 | 1,4 KW | 280 V | 10 A | 5 U |
| ACLS01450 | 1,4 KW | 500 V | 5 A | 5 U |
| ACLS02828 | 2,8 KW | 280 V | 20 A | 5 U |
| ACLS02850 | 2,8 KW | 500 V | 10 A | 5 U |
| ACLS04228 | 4,2 KW | 280 V | 30 A | 5 U |
| ACLS04250 | 4,2 KW | 500 V | 15 A | 5 U |
| ACLS05628 | 5,6 KW | 280 V | 40 A | 8 U |
| ACLS05650 | 5,6 KW | 500 V | 20 A | 8 U |
| ACLS07028 | 7 KW | 280 V | 50 A | 8 U |
| ACLS07050 | 7 KW | 500 V | 25 A | 8 U |
| ACLS08428 | 8,4 KW | 280 V | 60 A | 10 U |
| ACLS08450 | 8,4 KW | 500 V | 30 A | 8 U |
| ACLS09828 | 9,8 KW | 280 V | 70 A | 13 U |
| ACLS09850 | 9,8 KW | 500 V | 35 A | 11 U |
| ACLS11228 | 11,2 KW | 280 V | 80 A | 13 U |
| ACLS11250 | 11,2 KW | 500 V | 40 A | 11 U |
| ACLS12628 | 12,6 KW | 280 V | 90 A | 13 U |
| ACLS12650 | 12,6 KW | 500 V | 45 A | 11 U |
| ACLS14028 | 14 KW | 280 V | 100 A | 16 U |
| ACLS14050 | 14 KW | 500 V | 50 A | 14 U |
| ACLS15428RV | 15,4 KW | 280 V | 110 A | 16 U |
| ACLS15450 | 15,4 KW | 500 V | 55 A | 16 U |
| ACLS16828RV | 16,8 KW | 280 V | 120 A | 16 U |
| ACLS16850 | 16,8 KW | 500 V | 60 A | 16 U |
| ACLS18228RV | 18,2 KW | 280 V | 120 A | 19 U |
| ACLS18250 | 18,2 KW | 500 V | 65 A | 19 U |
| ACLS19628RV | 19,6 KW | 280 V | 120 A | 19 U |
| ACLS19650 | 19,6 KW | 500 V | 70 A | 19 U |
| ACLS21028RV | 21 KW | 280 V | 120 A | 19 U |
| ACLS21050 | 21 KW | 500 V | 75 A | 19 U |
Three phase load input
| Description | Power | Voltage | Current | Dimensions |
|---|---|---|---|---|
| ACLT04228 | 1,4 KW | 280 V | 10 A | 6 U |
| ACLT04250 | 1,4 KW | 500 V | 5 A | 6 U |
| ACLT08428 | 2,8 KW | 280 V | 20 A | 10 U |
| ACLT08450 | 2,8 KW | 500 V | 10 A | 10 U |
| ACLT12628 | 4,2 KW | 280 V | 30 A | 14 U |
| ACLT12650 | 4,2 KW | 500 V | 15 A | 14 U |
| ACLT16828 | 5,6 KW | 280 V | 40 A | 18 U |
| ACLT16850 | 5,6 KW | 500 V | 20 A | 18 U |
| ACLT21028 | 7 KW | 280 V | 50 A | 22 U |
| ACLT21050 | 7 KW | 500 V | 25 A | 22 U |
| ACLT25228 | 8,4 KW | 280 V | 60 A | 26 U |
| ACLT25250 | 8,4 KW | 500 V | 30 A | 26 U |
AC-Load ACL
ACLS single-phase and ACLT three-phases
Description
DC voltage and AC voltage up to 1,000 Hz loads the ACL series.Besides the single-phase models (ACLS) there are also threephases loads (ACLT) which combine 3 channels or phases in one enclosure. Ethernet, USB, RS-232, CAN, I/O interface and a system bus for master-slave connection are built in serially, the GPIB interface is available as an option. The programming is done in SCPI with an extensive command syntax.
Operating modes
The ACL series loads have the operating modes constant current, constant resistance, constant power and constant voltage (CC, CR, CP, CV mode). In ACL mode, the load current mode has the set wave form independent of the input voltage. In resistance mode the height and wave form of the current depends on the input voltage. In power and voltage mode, the power or voltage is controlled by adjusting the input current.
Single-phase and rotary currents
In addition to the ACLS single-phase loading systems, the ACLT series models were developed for loading rotary current systems. They combine three alternating current load channels in one enclosure. The three load channels can be used to load 3 different DUTs in AC or DC operation or to test a rotary current system.
Parallel connection
To increase the maximum load current several channels of a rotary current device ACLT, but also several single-phase devices ACLS can be connected in parallel. Several singlephase devices can be connected to a master-slave system.
One phase load input
| Bezeichnung | Leistung | Spannung | Strom | Maße |
|---|---|---|---|---|
| ACLS00528 | 500 W | 280 V | 4 A | 2 HE |
| ACLS00550 | 500 W | 500 V | 2 A | 2 HE |
| ACLS01028 | 1 KW | 280 V | 8 A | 2 HE |
| ACLS01050 | 1 KW | 500 V | 4 A | 2 HE |
| ACLS01428 | 1,4 KW | 280 V | 10 A | 5 HE |
| ACLS01450 | 1,4 KW | 500 V | 5 A | 5 HE |
| ACLS02828 | 2,8 KW | 280 V | 20 A | 5 HE |
| ACLS02850 | 2,8 KW | 500 V | 10 A | 5 HE |
| ACLS04228 | 4,2 KW | 280 V | 30 A | 5 HE |
| ACLS04250 | 4,2 KW | 500 V | 15 A | 5 HE |
| ACLS05628 | 5,6 KW | 280 V | 40 A | 8 HE |
| ACLS05650 | 5,6 KW | 500 V | 20 A | 8 HE |
| ACLS07028 | 7 KW | 280 V | 50 A | 8 HE |
| ACLS07050 | 7 KW | 500 V | 25 A | 8 HE |
| ACLS08428 | 8,4 KW | 280 V | 60 A | 10 HE |
| ACLS08450 | 8,4 KW | 500 V | 30 A | 8 HE |
| ACLS09828 | 9,8 KW | 280 V | 70 A | 13 HE |
| ACLS09850 | 9,8 KW | 500 V | 35 A | 11 HE |
| ACLS11228 | 11,2 KW | 280 V | 80 A | 13 HE |
| ACLS11250 | 11,2 KW | 500 V | 40 A | 11 HE |
| ACLS12628 | 12,6 KW | 280 V | 90 A | 13 HE |
| ACLS12650 | 12,6 KW | 500 V | 45 A | 11 HE |
| ACLS14028 | 14 KW | 280 V | 100 A | 16 HE |
| ACLS14050 | 14 KW | 500 V | 50 A | 14 HE |
| ACLS15428RV | 15,4 KW | 280 V | 110 A | 16 HE |
| ACLS15450 | 15,4 KW | 500 V | 55 A | 16 HE |
| ACLS16828RV | 16,8 KW | 280 V | 120 A | 16 HE |
| ACLS16850 | 16,8 KW | 500 V | 60 A | 16 HE |
| ACLS18228RV | 18,2 KW | 280 V | 120 A | 19 HE |
| ACLS18250 | 18,2 KW | 500 V | 65 A | 19 HE |
| ACLS19628RV | 19,6 KW | 280 V | 120 A | 19 HE |
| ACLS19650 | 19,6 KW | 500 V | 70 A | 19 HE |
| ACLS21028RV | 21 KW | 280 V | 120 A | 19 HE |
| ACLS21050 | 21 KW | 500 V | 75 A | 19 HE |
Three phase load input
| Bezeichnung | Leistung | Spannung | Strom | Maße |
|---|---|---|---|---|
| ACLT04228 | 1,4 KW | 280 V | 10 A | 6 HE |
| ACLT04250 | 1,4 KW | 500 V | 5 A | 6 HE |
| ACLT08428 | 2,8 KW | 280 V | 20 A | 10 HE |
| ACLT08450 | 2,8 KW | 500 V | 10 A | 10 HE |
| ACLT12628 | 4,2 KW | 280 V | 30 A | 14 HE |
| ACLT12650 | 4,2 KW | 500 V | 15 A | 14 HE |
| ACLT16828 | 5,6 KW | 280 V | 40 A | 18 HE |
| ACLT16850 | 5,6 KW | 500 V | 20 A | 18 HE |
| ACLT21028 | 7 KW | 280 V | 50 A | 22 HE |
| ACLT21050 | 7 KW | 500 V | 25 A | 22 HE |
| ACLT25228 | 8,4 KW | 280 V | 60 A | 26 HE |
| ACLT25250 | 8,4 KW | 500 V | 30 A | 26 HE |