HEA-ELR10000
HEA-ELR10000
Regenerative DC-Load
The regenerative load
The new HEA-ELR10000 series of electronic loads with mains recovery is an extension of the HEAELR9000 HP series and offers twice the nominal power at only 1 height unit more. Compared to the HEA-ELR9000 HP series at 30 kW power, this results in a space saving of 2 U or one third. Due to the extended master-slave bus, up to 36 devices can be realized in a system network, which can achieve a total power of up to 1.08 MW.
Power recovery
At these electronic loads, the mains input is also always used for energy recovery of the power taken at the DC input, which is converted with an efficiency of up to 95.5 %. This type of energy recovery helps to save costs and avoids costly cooling systems compared to conventional loads that convert their input power into heat.
Battery test
For testing all types of batteries, e.g. with constant current or constant resistance discharge, the devices offer a battery test mode. This mode shows separate values like elapsed test time and removed capacity (Ah). The data recorded during the test on a PC, e.g. with HEA power control, can be exported and evaluated as an Excel table in CSV format (discharge diagram). An adjustable table, maximum test time and a variable final discharge voltage supplement the existing setting options.
Function generator and table control
A special feature is the convenient, FPGA-based, digital function and arbitrary generator, which enables the control system of time-sequential, freely programmable load profiles. This enables the generation of alternating sine and rectangular functions or sawtooth or ramp curves. With a freely programmable, digital value table with 3,276 interpolation points embedded in the control loop, non-linear internal resistances of consumers, such as batteries or LED chains, can be simulated as desired.
- AC input range 342…528 VAC
- Power: 30 kW per device
- Energy recovery with high efficiency
- Galvanically isolated DC input
- Input power: 30 kW per device
- Input voltages: 60 V up to 2.000 V
- Input currents: 40 A up to 1,000 A per device
- FPGA-based, digital control
- Multilingual TFT touch panel operating unit
- User profiles, function generator
- Galvanically separate interfaces (analogue, USB, Ethernet)
- Master-Slave-Bus for parallel connection
- Extra USB port for autonomous data recording
- Optional, digital, pluggable interface modules
- SCPI and ModBus RTU command language and LabView
- Control system software for Windows
Description | Power | Voltage | Current | Resistance | Dimensions | Weight |
---|---|---|---|---|---|---|
HEA-ELR10060-1000 4U | 30 kW | 60 V | 1.000 A | 0,003...5 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10080-1000 4U | 30 kW | 80 V | 1.000 A | 0,003...5 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10200-420 4U | 30 kW | 200 V | 420 A | 0,0165...25 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10360-240 4U | 30 kW | 360 V | 240 A | 0,05...90 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10500-180 4U | 30 kW | 500 V | 180 A | 0,08...170 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10750-120 4U | 30 kW | 750 V | 120 A | 0,2...370 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR11000-80 4U | 30 kW | 1.000 V | 80 A | 0,4...650 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR11500-60 4U | 30 kW | 1.500 V | 60 A | 0,8...1.500 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR12000-40 4U | 30 kW | 2.000 V | 40 A | 1,7...2.700 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10000
Regenerative DC-Load
The regenerative load
The new HEA-ELR10000 series of electronic loads with mains recovery is an extension of the HEAELR9000 HP series and offers twice the nominal power at only 1 height unit more. Compared to the HEA-ELR9000 HP series at 30 kW power, this results in a space saving of 2 U or one third. Due to the extended master-slave bus, up to 36 devices can be realized in a system network, which can achieve a total power of up to 1.08 MW.
Power recovery
At these electronic loads, the mains input is also always used for energy recovery of the power taken at the DC input, which is converted with an efficiency of up to 95.5 %. This type of energy recovery helps to save costs and avoids costly cooling systems compared to conventional loads that convert their input power into heat.
Battery test
For testing all types of batteries, e.g. with constant current or constant resistance discharge, the devices offer a battery test mode. This mode shows separate values like elapsed test time and removed capacity (Ah). The data recorded during the test on a PC, e.g. with HEA power control, can be exported and evaluated as an Excel table in CSV format (discharge diagram). An adjustable table, maximum test time and a variable final discharge voltage supplement the existing setting options.
Function generator and table control
A special feature is the convenient, FPGA-based, digital function and arbitrary generator, which enables the control system of time-sequential, freely programmable load profiles. This enables the generation of alternating sine and rectangular functions or sawtooth or ramp curves. With a freely programmable, digital value table with 3,276 interpolation points embedded in the control loop, non-linear internal resistances of consumers, such as batteries or LED chains, can be simulated as desired.
- AC input range 342…528 VAC
- Power: 30 kW per device
- Energy recovery with high efficiency
- Galvanically isolated DC input
- Input power: 30 kW per device
- Input voltages: 60 V up to 2.000 V
- Input currents: 40 A up to 1,000 A per device
- FPGA-based, digital control
- Multilingual TFT touch panel operating unit
- User profiles, function generator
- Galvanically separate interfaces (analogue, USB, Ethernet)
- Master-Slave-Bus for parallel connection
- Extra USB port for autonomous data recording
- Optional, digital, pluggable interface modules
- SCPI and ModBus RTU command language and LabView
- Control system software for Windows
Description | Power | Voltage | Current | Resistance | Dimensions | Weight |
---|---|---|---|---|---|---|
HEA-ELR10060-1000 4U | 30 kW | 60 V | 1.000 A | 0,003...5 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10080-1000 4U | 30 kW | 80 V | 1.000 A | 0,003...5 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10200-420 4U | 30 kW | 200 V | 420 A | 0,0165...25 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10360-240 4U | 30 kW | 360 V | 240 A | 0,05...90 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10500-180 4U | 30 kW | 500 V | 180 A | 0,08...170 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR10750-120 4U | 30 kW | 750 V | 120 A | 0,2...370 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR11000-80 4U | 30 kW | 1.000 V | 80 A | 0,4...650 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR11500-60 4U | 30 kW | 1.500 V | 60 A | 0,8...1.500 Ω | 19“ x 4 U x 670 mm | about 50 kg |
HEA-ELR12000-40 4U | 30 kW | 2.000 V | 40 A | 1,7...2.700 Ω | 19“ x 4 U x 670 mm | about 50 kg |