HEIDEN power GmbH

Nehmen Sie Kontakt auf

 

+49-8196-9988-0

info@heidenpower.com


Bürozeiten:
Montag – Donnerstag: 08.00 – 17.00 Uhr
Freitag: 08.00 – 14.30 Uhr

Anschrift:
HEIDEN power GmbH
Am Wiesengrund 1
86932 Pürgen / Germany


PMLA Elektronische DC Mehrkanallast

PMLA Multilast

DC-LAST

PMLA Multilast

Die Mehrkanalige

Kurzprofil

Die Mehrkanal-Last PMLA vereint bis zu 12 Lastkanäle/-module in einem kompakten 19“-Gehäuse mit nur zwei Höheneinheiten. Alle Lastkanäle sind galvanisch voneinander getrennt, dadurch lassen sich mehrkanalige Testsysteme wie Burn-In-Einrichtungen sehr einfach konfigurieren. Ein Master-Gerät, das sowohl eine grafische Benutzer- als auch verschiedene Datenschnittstellen besitzt, steuert alle Lastkanäle des Systems, das bei Bedarf durch ein oder mehrere Slave-Geräte erweitert wird.

Konfiguration

Die PMLA Elektronische Mehrkanallast verfügt je nach Ausführung über bis zu drei Kühlereinheiten mit jeweils vier Montageplätzen für Lastmodule. Es stehen Module mit verschiedenen Leistungen von 150 W, 300 W, 450 W oder 600 W zur Verfügung. Je nach Leistung belegt ein Modul einen (150 W), zwei (300 W), drei (450 W) oder vier interne Steckplätze für 600 W pro Einzelkanal.

Entladefunktion, Energiespeichertest

Die Entladefunktion testet Energiespeicher wie Batterien, Ultracaps, Elkos und Solarpanels etc. indem diese in CC-, CPoder CR-Betrieb entladen werden. Die Entladefunktion ist mit der List-Funktion kombinierbar, so dass ein gepulstes Entladen möglich ist. Eine IUa-Entladung in den kombinierten Betriebsarten CC+CV, CR+CV oder CP+CV ist ebenfalls möglich: Dabei wird der Prüfling mit Konstantstrom, -widerstand
oder -leistung bis zu einer definierten Spannung entladen. Diese Spannung wird dann solange konstant gehalten, bis ein definierter Minimalstrom erreicht ist. Stoppkriterien sind Ladung, Energie, Zeit, Strom und Spannung.

  • Konfigurierbare Mehrkanallast
  • Bis 12 Kanäle in 19“, 2 HE
  • Kanalerweiterung über Slave-Geräte
  • Maximal 72 Kanäle pro System
  • Module 150 W – 300 W – 450 W – 600 W
  • Spannungen 40 V – 60 V – 120 V – 240 V
  • Ströme von 1 A bis 120 A Dynamische Belastungen

BezeichnungLeistungSpannungStromDynamikMaße
MA15-04C30150 W40 V30 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-06C20150 W60 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-06C5150 W60 V5 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-12C10150 W120 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-12C2150 W120 V2 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-24C5150 W240 V5 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-24C1150 W240 V1 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-04C60300 W40 V60 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-06C40300 W60 V40 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-06C10300 W60 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-12C20300 W120 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-12C4300 W120 V4 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-24C10300 W240 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-24C2300 W240 V2 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-04C90450 W40 V90 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-06C60450 W60 V60 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-06C15450 W60 V15 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-12C30450 W120 V30 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-12C6450 W120 V6 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-24C15450 W240 V15 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-24C3450 W240 V3 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-04C120600 W40 V120 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-06C80600 W60 V80 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-06C20600 W60 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-12C40600 W120 V40 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-12C8600 W120 V8 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-24C20600 W240 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-24C4600 W240 V4 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
DC-LAST

PMLA Multilast

Die Mehrkanalige

Kurzprofil

Die Mehrkanal-Last PMLA vereint bis zu 12 Lastkanäle/-module in einem kompakten 19“-Gehäuse mit nur zwei Höheneinheiten. Alle Lastkanäle sind galvanisch voneinander getrennt, dadurch lassen sich mehrkanalige Testsysteme wie Burn-In-Einrichtungen sehr einfach konfigurieren. Ein Master-Gerät, das sowohl eine grafische Benutzer- als auch verschiedene Datenschnittstellen besitzt, steuert alle Lastkanäle des Systems, das bei Bedarf durch ein oder mehrere Slave-Geräte erweitert wird.

Konfiguration

Die PMLA Elektronische Mehrkanallast verfügt je nach Ausführung über bis zu drei Kühlereinheiten mit jeweils vier Montageplätzen für Lastmodule. Es stehen Module mit verschiedenen Leistungen von 150 W, 300 W, 450 W oder 600 W zur Verfügung. Je nach Leistung belegt ein Modul einen (150 W), zwei (300 W), drei (450 W) oder vier interne Steckplätze für 600 W pro Einzelkanal.

Entladefunktion, Energiespeichertest

Die Entladefunktion testet Energiespeicher wie Batterien, Ultracaps, Elkos und Solarpanels etc. indem diese in CC-, CPoder CR-Betrieb entladen werden. Die Entladefunktion ist mit der List-Funktion kombinierbar, so dass ein gepulstes Entladen möglich ist. Eine IUa-Entladung in den kombinierten Betriebsarten CC+CV, CR+CV oder CP+CV ist ebenfalls möglich: Dabei wird der Prüfling mit Konstantstrom, -widerstand
oder -leistung bis zu einer definierten Spannung entladen. Diese Spannung wird dann solange konstant gehalten, bis ein definierter Minimalstrom erreicht ist. Stoppkriterien sind Ladung, Energie, Zeit, Strom und Spannung.

  • Konfigurierbare Mehrkanallast
  • Bis 12 Kanäle in 19“, 2 HE
  • Kanalerweiterung über Slave-Geräte
  • Maximal 72 Kanäle pro System
  • Module 150 W – 300 W – 450 W – 600 W
  • Spannungen 40 V – 60 V – 120 V – 240 V
  • Ströme von 1 A bis 120 A Dynamische Belastungen

BezeichnungLeistungSpannungStromDynamikMaße
MA15-04C30150 W40 V30 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-06C20150 W60 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-06C5150 W60 V5 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-12C10150 W120 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-12C2150 W120 V2 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-24C5150 W240 V5 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA15-24C1150 W240 V1 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-04C60300 W40 V60 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-06C40300 W60 V40 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-06C10300 W60 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-12C20300 W120 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-12C4300 W120 V4 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-24C10300 W240 V10 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA30-24C2300 W240 V2 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-04C90450 W40 V90 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-06C60450 W60 V60 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-06C15450 W60 V15 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-12C30450 W120 V30 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-12C6450 W120 V6 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-24C15450 W240 V15 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA45-24C3450 W240 V3 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-04C120600 W40 V120 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-06C80600 W60 V80 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-06C20600 W60 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-12C40600 W120 V40 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-12C8600 W120 V8 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-24C20600 W240 V20 A200 µs19“ x 2 HE - 485 x 88 x 485 mm
MA60-24C4600 W240 V4 A200 µs19“ x 2 HE - 485 x 88 x 485 mm